Yanmar 4LHA-STZP Specifikace Strana 21

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 67
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 20
_
19
_
(1) Gauges and Equipment
Gauges & Equipment Functions
Starter switch
OFF: The switch key can be inserted or removed.
All power is turned off.
ON: For engine operation. Gauges and alarm devices are turned on.
START: For engine starting. When the key is released after starting, it
moves automatically to ON.
GLOW: For the air heater (optional)
(Note) The engine cannot be stopped by the starter switch.
Engine stop switch
Press the button to stop the engine by fuel cut.
And continue to push the stop button until the engine has come to a
complete stop.
Alarm buzzer
The buzzer sounds if an abnormality arises.
See explanation under (2).
Warning lamps
The lamps come on when an abnormality arises.
See explanation under (2).
Buzzer stop switch
The switch is used to stop the buzzer noise temporarily.Do not turn the
buzzer off except when inspecting for an abnormality.
Illumination switch
Switch for lighting control panel.
Hour meter
Total operation hours are shown in the window below the tachometer.
Refer to the figure as a standard for periodic inspections.
Lube.Oil. pressure
meter
The needle shows engine oil pressure.
Cooling water
temperature meter
The needle shows engine cooling fresh water temperature.
Boost meter
The needle shows intake air pressure (intake air boost pressure of
turbocharger.)
Heat up indicating
lamp for air heater
The lamp comes on when the air heater is heated to start the engine
easily under low temperature condition. (Refer to 4.3.2)
(The lamp is located in warning lamp display column.)
Before starting
during operation
Release your
hold when
engine
engine is
started
GLOW
OFF
ON
STSRT
DIESEL
PREHEAT
Zobrazit stránku 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 66 67

Komentáře k této Příručce

Žádné komentáře