Yanmar 4LHA-STZP Specifikace stáhnout pdf (Strana 43)

■Draining the water from the cooling fresh water system

If antifreeze has not been added to the fresh cooling water, be sure to drain the water from the

fresh water system.

①Open the drain cock at the side of the cylinder block, and drain off the water inside.

②Open the fresh water cooler cock and drain off the water inside.

③Open the drain cock on the fresh water pipe of the front of engine (under the cooling fresh

water pump)

④Close the drain cocks after draining the water.

(3) Cleaning, Draining Fuel Oil, Greasing

●

Clean the outside of the engine wiping off any dust or oil.

●

To prevent condensation inside the fuel tank, either drain off the fuel or fill the tank.

●

Grease the exposed area and joints of the remote control cable and the bearings of the

remote control handle.

(4) Safeguarding the Engine Against Water and Moisture

●

Cover the intake silencer, exhaust pipe, etc. with vinyl sheets and seal them to prevent

moisture from entering.

●

Drain bilge in the hull bottom completely.

●

Water may leak into the boat when it is moored, and whenever possible it should be landed.

●

Waterproof the engine room to prevent rain and seawater from entering.

(5) Maintaining the Battery Charge

●

Be sure to turn off the battery switch.

During long-term storage, charge the battery once a month to compensate for the battery's

self-discharge.

4.9.2 Checking the Engine for Reuse After a Long Storage Period

When using the engine after a long period of storage, prepare for operation in the same manner as

for a new engine.

→See [ 3. Before Opration]

Fresh water

Fresh water cooler

Fresh

water cooler

For 4LHA-HTP/-HTZP

Lube oil filter

Position of fresh water cocks

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 66 67

Žádné komentáře

Yanmar 4LHA-STZP Specifikace Strana 43