Yanmar 4LHA-STZP Specifikace stáhnout pdf (Strana 29)

Lube oil filler cap

3.3 Supplying Engine Lube Oil

Fill with the specified amount of engine oil.

①Remove the filler cap on the top of the bonnet

and fill with oil.

②Remove the oil dipstick and supply lube oil to

the upper limit on the oil dipstick. To check the

oil level, insert the dipstick in fully.

Engine oil capacity : ALL: 13

Oil pan : 10

③Reinstall the dipstick and tighten the filler cap

firmly by hand.

Do not overfill.

Overfilling will cause oil to be sprayed

out from the breather during operation

and into the suction inlet, and lead to

engine problems.

[

NOTICE

]

●

4LHA-HTP/-HTZP

①Open the cock on the fuel oil inlet pipe line.

②Loosen the air bleeding screw on the fuel filter

by turning 2~3 times to the counter-clockwise

using a screw driver.

③Feed the fuel with the priming pump.

The priming pump is on the top of the fuel

filter.

Move the priming pump knob up and down

until fuel mixed with air bubbles flows out of

the air bleeding port.

④When the fuel coming out is clear and not mixed

with any bubbles, tighten the air bleeding

screw.

Air bleeding

screw

Dipstick

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 66 67

Žádné komentáře

Yanmar 4LHA-STZP Specifikace Strana 29