Yanmar BY series Specifikace stáhnout pdf (Strana 49)

BEFORE YOU OPERATE

42 BY Series Operation Manual

1. Turn the key switch on and leave on for

10 seconds.

2. Turn key switch OFF for 5 seconds,

then turn key switch ON for 10 seconds.

3. Repeat steps 1 and 2 five more times.

Note: The engine may run rough and

misfire for a few seconds when

first started until any remaining

air is purged from the fuel

system.

4. Attempt to start the engine. If the

engine does not start within a

reasonable time, repeat steps 1 and 2

until the engine starts and runs.

ENGINE OIL

CAUTION

NEVER hold the key in the

START position for longer than

10 seconds or the starter motor

will overheat.

0000201en

CAUTION

NEVER use an engine starting

aid such as ether. Engine

damage will result.

0000009en

CAUTION

• Only use the engine oil

specified. Other engine oils

may affect warranty coverage,

cause internal engine

components to seize, or

shorten engine life.

• Prevent dirt and debris from

contaminating engine oil.

Carefully clean the dipstick

and the surrounding area

before you remove the cap.

• NEVER mix different types of

engine oil. This may adversely

affect the lubricating

properties of the engine oil.

• NEVER overfill. Overfilling may

result in white exhaust smoke,

engine overspeed or internal

damage.

0000005en

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 126 127

Komentáře k této Příručce

Žádné komentáře