Yanmar BY series Specifikace stáhnout pdf (Strana 22)

BY Series Operation Manual 15

A WARNING

WELDING SHOCK

HAZARD!

• Turn off the battery switch (if

equipped) or disconnect the

negative battery cable and the

leads to the alternator when

welding on the vessel.

• Remove the multi-pin

connector to the engine

control unit. Connect the weld

clamp to the component to be

welded and as close as

possible to the welding point.

• NEVER connect the weld

clamp to the engine or in a

manner which would allow

current to pass through a

mounting bracket.

• When welding is completed,

reconnect the leads to the

alternator and engine control

unit prior to reconnecting the

batteries.

• Failure to comply could result

in death or serious injury.

0000117en

A WARNING

ENTANGLEMENT

HAZARD!

• Stop the engine before you

begin to service it.

• NEVER leave the key in the key

switch when you are servicing

the engine. Someone may

accidentally start the engine

and not realize you are

servicing it. This could result

in a serious injury.

• If you must service the engine

while it is operating, remove all

jewelry, tie back long hair, and

keep your hands, other body

parts and clothing away from

moving / rotating parts.

• Failure to comply could result

in death or serious injury.

0000010en

A WARNING

BURN HAZARD!

• Wait until the engine cools

before you drain the engine

coolant. Hot engine coolant

may splash and burn you.

• Failure to comply could result

in death or serious injury.

0000016en

SAFETY

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 126 127

Komentáře k této Příručce

Žádné komentáře