Yanmar BY series Specifikace stáhnout pdf (Strana 114)

BY Series Operation Manual 107

BY Series Operation Manual

LONG-TERM

STORAGE

If the engine is not to be used for an

extended period of time, special measures

should be taken to protect the coolant

system, fuel system and combustion

chambers from corrosion and the exterior

from rusting. It is recommended that you

see your authorized Yanmar marine dealer

or distributor to prepare the engine for

long-term storage.

The engine can normally stand idle for up

to six months. If it remains unused for

longer than this, please contact your

authorized Yanmar marine dealer or

distributor.

Winter Storage

Drain water from fuel tank and fuel filters

before and after extended storage.

To reduce the risk of condensation in the

fuel tank during winter storage, fill the tank

with fuel and treat with diesel fuel

stabilizer.

PREPARE ENGINE FOR

LONG-TERM STORAGE

IMPORTANT

Do not drain closed cooling

system for long-term storage.

Antifreeze must be used to avoid

freezing and damaging of

components. Antifreeze will

prevent rusting during long-term

storage.

1. Change engine oil and filter.

2. Drain seawater cooling system. See

Drain Seawater Cooling System on

page 108.

3. Wipe off any dust or oil from the outside

of engine.

4. Drain fuel tank or fill the tank to prevent

condensation.

5. Grease the exposed areas and joints of

the remote control cables and the

bearings of the remote control handle.

6. Seal the intake silencer, exhaust pipe,

etc. to prevent moisture or

contamination from entering engine.

7. Completely drain bilge in hull bottom.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 126 127

Komentáře k této Příručce

Žádné komentáře