Yanmar 1GM10 Specifikace Strana 82

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 94
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 81
SPECIFICATIONS
76 GM Series Operation Manual
1GM10V Engine
Note: Density of fuel: 0.842g/cm
3
at 15°C. Fuel temperature at the inlet of the fuel injection pump.
1 hp metric = 0.7355 kW
Type Vertical 4-cycle water-cooled diesel engine
Combustion System Swirl pre-combustion chamber
Number of Cylinders 1
Bore and Stroke 75 mm x 72 mm (2.95 in. x 2.83 in.)
Displacement 0.318 L (19.4 cu. in.)
Continuous
Rating Output
Output at Crankshaft /
Engine Speed
5.9 kW (8 hp metric) / 3400 min
-1*
Maximum
Rating Output
Output at Crankshaft /
Engine Speed
9.7 kW (9.1 hp metric) / 3600 min
-1
*
6.55 kW (8.9 hp metric) / 3600 min
-1**
Fuel Injection Timing (BTDC) 15 1
Fuel Injection Pressure 16.7 0.5 MPa (2347-2489 psi)
Main Power Take Off At flywheel end
Front Power Take Off At crankshaft V-pulley end
Direction of
Rotation
Crankshaft Counterclockwise viewed from stern
Propeller Shaft (Ahead) Clockwise viewed from stern
Cooling System Direct seawater cooling (Rubber impeller water pump)
Lubrication System Forced lubrication system
Starting System Type Electric and manual
Starting Motor 12 VDC, 1.0 kW
AC Generator 12V, 35A
Marine Gear
System
Model KM3V
Type V-Drive, Mechanical cone clutch
(15)
Reduction Ratio Forward 2.36 2.61 3.20
Reverse 3.16 3.16 3.16
Propeller Speed DIN
6270A Rating
Forward 1441 min
-1
1303 min
-1
1063 min
-1
Reverse 1076 min
-1
1076 min
-1
1076 min
-1
Lubricating Oil Capacity 0.3 L (0.32 qt)
Weight 19 kg (41.9 lb)
Dimensions Overall Length 680 mm (26.77 in.)
Overall Width 450 mm (17.71 in.)
Overall Height 554 mm (21.81 in.)
Lubricating Oil
Capacity
(8 Rake Angle)
Total 1.5 L (1.59 qt)
Effective 0.8 L (0.85 qt)
Engine Weight with Marine Gear 90 kg (198 lb)
* Rating Condition: Temperature of fuel: 25°C at fuel pump inlet; ISO 3046-1
** Rating Condition: Temperature of fuel: 40°C at fuel pump inlet; ISO 8665
GM_OM.book 76 ページ 2013年6月10日 月曜日 午後2時26分
Zobrazit stránku 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 93 94

Komentáře k této Příručce

Žádné komentáře