Yanmar 4JH3-TCE Specifikace stáhnout pdf (Strana 22)

22

6. Periodic Inspections and Maintenance

EN

6.2.1 When the boat is in the water

6.2.1.1 Preparing the sail-drive:

(1) Take out the oil changing plug lo-

cated under the shift lever.

(2) Screw in the adapter joint (196311-

92960) with the O-ring

(24311-000100). When using own

adapter joint, max. length of thread

is 12 mm.

(3) Attach a stiff rubber hose with inner

diameter ø14~16 mm with hose

clips to the adapter joint at the oil

changing position. Hose must be

long enough to drain to bucket or

pump. (If Yanmar original rubber

hose is used, part code is

196440-92970)

6.2.1.2 Removing oil (total quantity

2.2 liter)

6.2.1.3 Fastest way: Blowing out by

using Air pressure

First follow steps (1), (2), (3) on page 22

(1) Take out the plug from the upper

case cover.

(2) Screw in a second adapter joint (P/

N 196311-92960) with an O-ring (P/N

24311-000100) at the oil inlet posi-

tion. Screw in the oil plug at the dip-

stick position.

(3) Connect the air pressure hose with

hose clips.

(4) Option 1: Using Compressed air

from main system or 12 V portable

compressor.

1. Connect hose at top adapter joint to

compressed air and within 10 to 15

minutes almost all oil will be blown out.

AO-ring

B Adapter joint

C Oil changing plug

D Tread M10 x 1.5

C

D

B

A

003452-00E

APlug

A

003453-00E

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 32 33

Komentáře k této Příručce

Žádné komentáře