Yanmar 1GM10V Specifikace stáhnout pdf (Strana 39)

5. Turn the key switch to the ON position

(Figure 2, (2)). Ensure that the

instrument panel indicators light and

the alarm sounds. This indicates that

the indicators and the alarm are

working correctly.

Note: The water temperature

alarm indicator and water in Sail-

Drive indicator should not come on

during start-up.

OFF

ON

(

2

)

(

1

)

0005847

Figure 2

1 – OFF position

2 – ON position

6. Push the start button. Release the start

button when the engine has started.

NOTICE: NEVER hold the start

button for longer than 15 seconds

or the starter motor will overheat.

7. The alarm should stop and the indicator

lamps should go out. NOTICE: If any

indicator fails to illuminate when the

key switch is in the ON position, see

your authorized Yanmar Marine

dealer or distributor for service

before operating the engine.

Starting the Engine Manually

1. Open the seacock (if equipped).

2. Open the fuel cock.

3. Put the remote control shift lever in the

NEUTRAL position (Figure 3, (1)).

Note: Safety equipment should

make it impossible to start the

engine in any position other than

NEUTRAL.

(1)

(2)

0005888

Figure 3

1 – Starting Shaft

2 – Starting Handle

4. Turn the master battery switch (if

equipped) to ON.

ENGINE OPERATION

GM Series Operation Manual 33

© 2007 Yanmar Marine International

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 91 92

Komentáře k této Příručce

Žádné komentáře