Yanmar 3GM30 Specifikace Strana 58

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 114
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 57
PERIODIC MAINTENANCE
52 YM Series Operation Manual
Tightening Fasteners
Use the correct amount of torque when you tighten fasteners on the engine. Applying
excessive torque may damage the fastener or component and not enough torque may
cause a leak or component failure.
NOTICE
he tightening torque in the Standard Torque Chart should be applied only to the
bolts with a “7” head (JIS strength classification: 7T). Apply 60% torque to bolts
that are not listed. Apply 80% torque when tightened to aluminum alloy.
Bolt Diameter x
Pitch (mm)
M6x1.0 M8x1.25 M10x1.5 M12x1.75 M14x1.5 M16x1.5
Tightening
Torque
N·m 11.0 ± 1.0 26.0 ± 3.0 50.0 ± 5.0 90.0 ± 10.0 140.0 ± 10.0 230.0 ± 10.0
ft-lb 8.0 ± 0.7 19.0 ± 2.1 37.0 ± 3.6 66.0 ± 7.2 103 ± 7.2 170 ± 7.2
YM OPM_EN.book 52 ページ 2013年6月7日 金曜日 午前11時11分
Zobrazit stránku 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 113 114

Komentáře k této Příručce

валера 23 Aug 2024 | 15:16:25

родни арллд